Copper Continuous Extrusion Production Line
1. Main component 
a. Feedstock pay-off
b. Feedstock straighten unit
c. Feed cutting device
d. Hydraulic and lubricate system (including the 300Mpa EHV system)
e. Continuous extrusion machine
f. Cooling system (including the anti-oxidation system)
g. Take-up regulation system
h. Take-up strand
i. Electrical control system

• Main Technical Data

Model Specification	TJ250/ 45	TJ300/ 90	TJ350/ 200	TJ400/ 250	TJ400/ 280	TJ600/ 450	TJ600/ 450
Product scope	Copper flat and copper bus-bar
Wheel diameter (mm)	250	285	340	400	400	550	580
Max.wheel speed (rpm)	40	90	200	250	280	450	450
Motor power (kw)	11	11	11	10	10	8	8
Output capacity (kg)	144	400	700	1000	1000	1800	2400
Cross-section of product (nm2)	8~60	8~250	100~ 600	250~ 2200	250~ 2200	380~ 3700	380~ 5000
Max. width of product (mm)	18	50	70	170	170	205	320
Min. thickness of product (mm)	1	1.2	3	4	4	6	8
Flash	≤3%	≤3%	≤5%	≤5%	≤5%	≤5%	≤5%
Area of production line (m)	6*30	6*30	8*30	10*40	10*30	10*40	10*40
Dia. of feedstock (±0.2mm)	Φ8	Φ12.5	Φ16	Φ20	Φ20	Φ22	Φ25
Hardness	HB55~58
Tensile strength of feedstock (Mpa)	≤170